HP NRM42 - Manual (Page 43)

41
4.3.3 ADSL
ADSL Mode: The default setting is Auto Sync-UP. This mode will automatically detect
your ADSL, ADSL2+, ADSL2, G.dmt, G.lite, and T1.413. But in some area, multimode
cannot detect the ADSL line code well. If it is the case, please adjust the ADSL line code to
G.dmt or T1.413 first. If it still fails, please try the other values such as ALCTL, ADI, etc.
ADSL Type: There are five modes “Open Annex Type and Follow DSLAM’s
Setting”, ”Annex A”, ”Annex I”, “Anne x A/L”, ”Annex M” and “Annex A/I/L/M” that user can
select for this connection.