HP PAVILION D5063 - Manual (Page 32)

hp pavilion f50/f70 LCD Monitor
Using the Monitor
32 English
Backlight Info
The Backlight Info window shows the elapsed time of usage for the
light behind the display screen. The expected lifespan of the
backlight is approximately 30,000 to 40,000 hours. At some point
after the maximum usage time of the backlight has been exceeded,
you may notice a decrease in brightness of up to 50%. At this point,
the backlight needs to be replaced to restore full brightness.
CAUTION: The backlight can be replaced only by a trained
technician. Please contact the HP Support Center
for assistance. Do not attempt to replace the
light yourself.
NOTE: Do not use a screen saver with the LCD monitor, as the
backlight will be used. It is recommended that you enable
an automatic power saving mode, or switch off the monitor
when not in use.
To view Backlight Info:
1 Open the Backlight Info setting screen. See “Using Display
Manager” on page 24. The elapsed time is displayed.
2 Press the Menu button to exit the setting screen.
Serial Number
You may need to provide the display serial number to HP Support
technicians to help them serve you better during a Support call.
To view a Serial Number:
1 Open the Serial Number setting screen. See “Using Display
Manager” on page 24. The serial number is displayed.
2 Press the Menu button to exit the setting screen.
Mode Info
The Mode Info screen shows whether the current video input mode is
analog (1) or digital (2); shows the current resolution and refresh
rate; and shows how many User settings you have changed, and
how many preset settings have not been changed.
X