HP PAVILION D5063 - Manual (Page 22)

hp pavilion f50/f70 LCD Monitor
Adjusting the Monitor
22 English
Adjusting the Monitor
The monitor display has several adjustable settings which may need
to be fine-tuned occasionally. Adjust the monitor:
• When the monitor is installed for the first time.
• If the resolution (number of pixels on the display) or refresh rate
(vertical scan frequency rate) has been changed.
• If the graphic card has been changed.
• If the monitor is connected to a different computer.
• After using the Mode Recall function. See “To use Mode Recall” on
page 31.
NOTE: For best performance, it is recommended that you select a
video mode of 1024 x 768 @ 60 Hz for the f50 monitor
and 1280 x 1024 @ 60 Hz for the f70 monitor on the
computer.
Using the monitor controls
There are five controls for the f50 monitor and six controls for the
f70 monitor that perform the following operations:
NOTE: The volume control is available only on the f70 monitor.
Menu
Left Browse/
Brightness
Auto/Select
On/Off
Volume
(f70 only)
Right Browse/
Contrast
X