Hunter Fan 81021 - Manual (Page 8)

43041-01 01/31/2008
8
5/8
1/2
5/8
1/2
1/8" Bit
slide the mounting rails into brackets.
Mark position of screws by using holes as a template.
new Construction – suspended between joists
position the correct depth mark at the bottom edge of
the joist based on the thickness of your sheetrock.
Drill a hole in the center of each outline.
Test the motor. if the motor does not run, check the plug
connection.
A22
E1
Go to step
on page 18
to attach grille.
A21
B11
B13
B14
B12
D
E
E
on
oFF