Hunter Fan 81021 - Manual (Page 14)

43041-01 01/31/2008
14
secure the motor by tightening the 2 screws.
Turn on the power source. Test the motor. if the motor does not run,
check the plug connection.
install the wiring cover plate. Make sure all wiring
connections are inside the box or under the
wiring cover plate.
reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
Connect wiring from motor the motor
to the wiring cover plate.
C23
C25
C26
F
H I
G
C24
H
C27
C28 C28
on
oFF