Hoover WindTunnel Wind Tunnel Canister Cleaner with Powered Hand Tool - Manual (Page 7)

How to clean stairs
Clean stairs by placing cleaner on end.
Clean stairs from bottom to top.
Wand storage clip
(some models)
To save storage space, stand the clean-
er on end and hook wand storage clip
on bottom of cleaner.
The nozzle must
be positioned down as shown.
Lift up on wand to remove storage clip
from cleaner.
How to store cleaner
The cleaning tools are conveniently
stored in the cleaner, as shown. To
replace the wall/floor brush, be sure to
turn the connector toward the cord
rewind pedal (M) before pushing the
brush in place.
To connect tools to metal wands, insert
end of tool into wand and snap into
position. To disconnect, press down on
the center of spring latch and remove
tool.
7
How to connect
To use the cleaner with tools, disconnect
the power nozzle from the hand grip.
Tools may be attached directly to the
hand grip. With the latch in the unlock
position, insert tool (or wand if extra
length is needed), then push latch to the
lock position to secure.
To remove the tool (or wand), push the
latch to the unlock position.
2 - 1 2 2 - 1 3 2 - 1 4
2 - 1 6 2 - 1 5
2 - 1 7 2 - 1 8
M
Powered hand tool
storage
The powered hand tool stores in the tool
lid.
To remove tool, grasp end of tool and
pivot forward.
The powered hand tool is ideal for
cleaning carpeted stairs.
Use light pressure when cleaning with
the powered hand tool as excessive
pressure may cause the brushes to stall.