Harbor Freight Tools 92499 - Manual (Page 2)

PRODUCT SPECIFICATIONS
SKU 92499 For technical questions, please call 1-800-444-3353 PAGE 2
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 11
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed in the following
pages may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
REV 05g; 05i
Electrical Requirements
110 Volt, 60 Hz, 2 Amps
Red LED “Power” Indicator
Green LED “Ready” Indicator
Motor Type: Synchronous
Power Plug Type: 2 Prong
Circuit Protection
Internal 3.15 Amp Fuse
(for replacement by qualified technician only)
Maximum Laminating Width 9”
Maximum Document Thickness .024” (.6mm)
Film Thickness 0.0030”-0.0040”
Laminating Speed Approx. 12” Per Minute
Warm Up Time 7 to 8 Minutes
Maximum Temperature 300° Fahrenheit
Overall Dimensions 13-1/4” L x 5-1/4” W x 3-1/8” H
Weight 3.5 Pounds