Save these instructions, Pump specifications, Unpacking – Harbor Freight Tools Pacific Hydrostar 2" or 3" dirty water pump 65322 User Manual

Page 6

SKU 65322 or 65323

For technical questions, please call 1-800-444-3353.

Page 6

Have the equipment serviced by a

qualified repair person using only

identical replacement parts. This will

ensure that the safety of the equip-

ment is maintained. Do not attempt

any service or maintenance proce-

dures not explained in this manual

or any procedures that you are un-

certain about your ability to perform

safely or correctly.
Store equipment out of the reach of

children.
Follow scheduled engine and equip-

ment maintenance.
Refueling Precautions:

Do not smoke, or allow sparks,

flames, or other sources of ignition

around the equipment, especially

when refuelling.
Do not refill the fuel tank while the

engine is running or hot.
Do not fill fuel tank to the top. Leave

a little room for the fuel to expand as

needed.
Refuel in a well-ventilated area only.

Save tHeSe

inStructionS.

PumP SPeciFicationS

Inlet / Outlet Diameter

Model 65322 = 3”

Model 65323 = 2”

Maximum Flow in GPM

(Gallons per Minute)

Model 65322 = 345

Model 65323 = 235

Maximum Lift Suction

Model 65322 = 26’

Model 65323 = 23’

Maximum Head

Model 65322 = 85’

Model 65323 = 82’

Anti-Reverse Flow

Rubberized Flap on

Inlet Port

note: Additional specifications found in

the TECHNICAL ENGINE SPECIFI-

CATIONS chart in this manual.
The emission control system for

this engine is warranted for standards

set by the U.S. Environmental Protec-

tion Agency. For warranty information,

refer to the last pages of this manual.

At high altitudes, the engine’s carbu-

retor, governor (if so equipped), and any

other parts that control the fuel-air ratio will

need to be adjusted by a qualified me-

chanic to allow efficient high-altitude use

and to prevent damage to the engine and

any other devices used with this product.

unPacKing

When unpacking, check to make sure

that the item is intact and undamaged. If

any parts are missing or broken, please

call Harbor Freight Tools at the number

shown on the cover of this manual as soon

as possible.

Included Accessories:
a. Inlet and Outlet Pipes.

b. Inlet Hose Basket Filter