Horizon Fitness CLUB SERIES CST3.5 - Manual (Page 11)

11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
YOU’RE FINISHED!
POWER SWITCH CIRCUIT BREAKER
A Open HARDWARE BAG .
B Slide SUPPORT BARS into side
MOUNTING BRACKETS and
line up with top MOUNTING
BRACKETS.
C Insert 2 BOLTS (G) into the tops
and 2 BOLTS (G) into the bottoms
of each SUPPORT BAR.
D Slide SUPPORT BAR BOOTS down
to cover BOLTS (G).
E Connect power plug to the
treadmill and connect the cord to
a power outlet. The on/off switch
is located next to the power
cord. Flip this switch to the 'ON'
position, so that the switch is
lit. You will hear a beep and the
console will light up.
ASSEMBLY STEP
#0-5 (
NN
2UZ
HARDWARE BAG 2 CONTENTS :
SUPPORT BAR BOOTS
BOLTS (G)
SUPPORT BARS
MOUNTING
BRACKET
BOLTS (G)