Cable termination, Free topology (single termination) network segment, Daisy-chain (double termination) network segment – Honeywell LONWORKS BUS 3252 User Manual
Page 4
L
ON
W
ORKS
® BUS WIRING GUIDELINES
® U.S. Registered Trademark
© 2008 Honeywell International Inc.
74-2865—04 K.K. Rev. 11-08
Automation and Control Solutions
Honeywell International Inc.
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North
35 Dynamic Drive
Golden Valley, MN 55422
Toronto, Ontario M1V 4Z9
Honeywell GmbH
Böblinger Straße 17
D-71101 Schönaich
customer.honeywell.com
Table 5. Echelon Generic Cable Specification For Belden 85102 Equivalent, Stranded Twisted Pair 16 AWG (1.5 mm
2
).
Cable Termination
The FTT network segment requires termination for proper
data transmission performance. Use a 209541B FTT
termination module. Free topology (singly terminated)
segments use the yellow and brown wires. Daisy-chain
(doubly terminated) segments use the orange and brown
wires. See Fig. 4.
Fig. 4. 209541B FTT termination module.
Free Topology (Single Termination)
Network Segment
In a free topology segment (singly terminated) only one
termination is required and the termination can be placed
anywhere on the free topology segment. See Fig. 1 and 5.
Fig. 5. Physical connection of module
for a single termination network.
Daisy-Chain (Double Termination)
Network Segment
In a daisy-chain free topology segment (doubly terminated)
two terminations are required, one at each end of the FTT
daisy-chained network segment. See Fig. 6 and 7.
Fig. 6. FTT termination module wiring for
double termination network topology.
Fig. 7. Physical connection of modules
for a double termination network.
L
ON
W
ORKS
®, Neuron®, L
ON
M
ARK
® and L
ON
M
ARK
® logo are
registered trademarks of Echelon® Corporation.
Minimum
Typical
Maximum
Units
Condition
DC Resistance, each conductor
14.0
14.7
15.5
Ohms/km
20°C per ASTM D 4566
DC Resistance Unbalance
20°C per ASTM D 4566
Mutual Capacitance
per ASTM D 4566
Characteristic Impedance
92
100
108
Ohms
64 khz to 1 Mhz, per ASTM D 4566
Attenuation
20 khz
1.3
Db/km
20°C per ASTM D 4566
64 khz
1.9
78 khz
2.2
156 khz
3.0
256 khz
4.8
512 khz
8.1
772 khz
11.3
1000 khz
13.7
Propagation Delay
5.6
Nsec/m
78 khz
M12198
YELLOW
ORANGE
BROWN
M12200
YELLOW
ORANGE
L
ONWORKS
-BUS
BROWN
TERMINATION
MODULE
TERMINATION
MODULE
DEVICE
DEVICE
DEVICE
(DAISY CHAINED)
(DAISY CHAINED)
DEVICE
DEVICE
M12199
M12201
ORANGE
YELLOW
L
ONWORKS
-BUS
BROWN
ORANGE
YELLOW
L
ONWORKS
-BUS
BROWN