Harbor Freight Tools 92798 - Manual (Page 6)

SKU 92798 For technical questions, please call 1-800-444-3353. Page 6
unplug the Charger by pulling on the Power Cord. Keep the Power Cord
away from heated surfaces.
8. To avoid electrical shock, do not handle the Charger (39), its Power
Cord Plug, or the Impact Wrench with wet hands.
9. Keep the Handle of the Impact Wrench dry, clean, free from oil and
grease.
12. Always turn off the Impact Wrench and unplug the Charger (39) from
its electrical outlet before changing accessories or performing any inspec-
tion, maintenance, or cleaning procedures.
13. Always switch to a fresh Battery (37) when tool performance begins to
diminish. Severe heat is most destructive to a Battery. The more heat gener-
ated, the faster the Battery loses power. A Battery that gets too hot can be per-
manently damaged. Never over-discharge a Battery by using the tool even after
tool performance is decreasing. Never attempt to discharge a tool’s Battery by
continuing to pull the tool’s trigger. When tool performance begins to diminish,
stop the tool, recharge the Battery, and use the fresh Battery for optimal perfor-
mance.
16. WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
11. Never leave the Charger (39) unattended when it is plugged into an
electrical outlet. Make sure to unplug it from its electrical outlet before leaving.
10. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Impact Wrench.
14. Battery (37) leakage may occur under extreme usage or temperature condi-
tions. If Battery fluid comes in contact with skin, wash with soap and water and
rinse with lemon juice and vinegar. If the fluid comes into contact with the eyes,
flush with water for several minutes and contact a doctor immediately.
15. Never burn the Battery, as it can explode in a fire. Do not charge the Impact
Wrench with a leaking Battery. Contact local solid waste authorities for instruc-
tions on correct disposal or recycling of the Battery.
17. WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.