Harbor Freight Tools 92798 - Manual (Page 10)

SKU 92798 For technical questions, please call 1-800-444-3353. Page 10
5. Battery (37): The power source for the Impact Wrench is a rechargeable,
19.2 VDC Battery. Make sure to follow all safety precautions when working with the
Battery. (See Figure D.)
6. Charger (39): The Charger is powered by plugging its Power Plug into a 120 volt,
grounded, electrical outlet. NEVER attempt to power the Charger with any other
electrical source other than a 120 volt, grounded electrical outlet. (See Figure D.)
FIGURE D
TO CHARGE THE IMPACT WRENCH
1. NOTE: The Battery (37) requires charging. The first charge requires 1 hour
charge time prior to using the Impact Wrench. (See Figure D.)
2. The Battery (37) should only be recharged when the Impact Wrench begins to
run slowly. (See Figure D.)
3. When the Battery (37) requires recharging, a 1 hour charge allows the tool to
operate at full power. Do not recharge the Battery longer than 1 hour, as damage
to the Battery and/or Impact Wrench will occur. (See Figure D.)
4. Make sure the Trigger (36) on the Impact Wrench is in its “OFF” position. Slide
the Battery (37) off the handle of the Impact Wrench. Insert the Battery into the
charging socket of the Charger (39). Then plug the Charger into the nearest 120
volt, grounded, electrical outlet. (See Figure D.)
TO 120 VOLT,
GROUNDED,
ELECTRICAL
OUTLET.
BATTERY
(37)
CHARGER
(39)
IMPACT HEAD
(7)
TRIGGER
(36)
FORWARD/REVERSE
SWITCH
(32)
BATTERY
(37)