Harbor Freight Tools 95504 - Manual (Page 2)

SKU 95504 Page 2
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly in-
structions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in
damp or wet locations. Don’t expose to rain. Keep work area well lighted.
Do not use electrically powered tools in the presence of flammable gases or
liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
5. Do not force tool. It will do the job better and more safely at the rate for
which it was intended. Do not use inappropriate attachments in an attempt
to exceed the tool capacity.
REV 07i, 09l
ITEM DESCRIPTION
Overall Dimensions 7-1/2”L x 5”W x 3-3/4”H
Handle Dimensions 1” Dia. x 3-1/8”L (left side only)
Inlet Size 1/4” - 18 NPT Female Thread
Max. Rated Air Pressure 90 PSI
Air Consumption 6 SCFM @ 90 PSI
Maximum Speed 10,000 RPM
Required Wheel Dimensions 4” Diameter x 1/4” Thickness (Grinding Wheel
not included)
Arbor Diameter 5/8”
Spindle Thread 3/8”
Net Weight 2.65 Lbs.