Hitachi DH24PB2 - Manual (Page 19)

19
English
Taper mode Code No. Applicable drill bit
7/16" (11 mm)
1/2" (12.3 mm)
303617
1/2" (12.7 mm)
9/16" (14.3 mm)
9/16" (14.5 mm)
11/16" (17.5 mm)
303618 7/8" (21.5 mm)
A-taper 303619
B-taper 303620
External dia. Code No.
7/16"
944460
(11 mm)
1/2"
944461
(12.3 mm)
1/2"
993038
(12.7 mm)
9/16"
944462
(14.3 mm)
9/16"
944500
(14.5 mm)
11/16"
944463
(17.5 mm)
7/8"
944464
(21.5 mm)
Morse taper
(No. 1)
Drill bit
(Taper
shank)
⅜ 1/2" (13 mm) Hammer Drill chuck and Chuck wrench
For drilling operations when using a straight shank bit for impact driling with a
rotary hammer
1/2" (13 mm) Hammer Drill
Chuck (SDS-plus shank)
(includes Chuck wrench)
Chuck wrench
Name Code No.
1/2" (13 mm) Hammer Drill Chuck 303332
Chuck wrench 303334
Rubber Cap 303335
Impact Drill
Application
Straight shank Bit






Taper shank adaptor formed A-
taper or B-taper is provided as an
optional accessory, but drill bit for
it is not provided.
Morse taper
(No. 2)
Drill bit
(Taper
shank)
Cotter (Code No. 944477)
⅜ Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank) (2) Taper Shank Adaptor
(SDS-plus shank)