Accessories, Warning, Standard accessories – Hitachi DH24PB2 User Manual

Page 18: Optional accessories

English

ACCESSORIES

WARNING:

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which
are not intended for use with this tool. Contact HITACHI if you
are not sure whether it is safe to use a particular replacement
part or accessory with your tool.
The use of any other attachment or accessory can be dangerous
and could cause injury or mechanical damage.

NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1)Plastic Case (Code No. 322706) ............................................................................... 1
(2)Side Handle (Code No. 303659) ............................................................................... 1
(3)Depth Gauge (Code No. 303709) ............................................................................. 1

1. Drilling anchor holes (Rotation + Hammering)

⅜ Drill Bit (Slender shaft)

(1) Drill Bit (Slender

Shaft)

(2) Adaptor for slender shaft

(SDS-plus shank)

(1) Drill Bit (Slender Shaft)

(2) Adaptor for

Slender Shaft

Outer diameter

Effective Length

Overall Length

Code No.

1/8"

1-25/32"

3-35/64"

306369

(3.4 mm)

(45 mm)

(90 mm)

306370

9/64"

1-25/32"

3-35/64"

306368

(3.5 mm)

(45 mm)

(90 mm)

OPTIONAL ACCESSORIES ...........

sold separately