Assembly, Raise the handle, Attach the guard – Hayter Mowers Powertrim 407F User Manual

Page 9

ASSEMBLY

1739579

RAISE THE HANDLE

1. Hold the

handle with one hand and loosen both handle adjustment knobs until the ratchet

teeth are disengaged. Do not remove the

handle adjustment knobs. See Figure 2.

2. Raise the

handle to the

operating position.

3. Stand in the operator’s

position behind the ma-
chine. Put the

handle in

a comfortable position.
Make sure both sides of
the

handle are level.

NOTE: Make sure the

cables are not caught

between the upper and

lower handle.

4. Tighten the

handle ad-

justment knobs. Make
sure the

handle pivots

are locked in place.
NOTE: The handlebar

height is adjustable.

See “How To Adjust

The Height Of The Han-

dlebar” in the Mainte-

nance section.

5. To attach the

recoil start handle to the rope guide, twist the rope through

the

rope guide mounted on the right side of the handlebar.

ATTACH THE GUARD

1. Attach the

guard to the machine with the

four

fasteners as shown. See Figure 3.

Figure 3

Guard

Trimmer

Fastener

Handle

Handle Adjustment

Knob

Handle

Pivot

Recoil Start

Handle

Rope

Guide

Figure 2