Havis-Shields DS-DELL-103 - Manual (Page 5)

www.havis.com • 1-800-524-9900 8 5
Parts Included
Power Button/LED
Front Hooks
Lock
Latch Handle
Docking Connector
Strain Relief Points
Foot Pads
(DS-DELL-220 Series only)
Macro Alignment Brackets
(DS-DELL-220 Series only)
Docking Station
Mounting Bracket
Hardware Kit
This Hardware Kit includes:
1. Zip Ties (4)
2. Keys (2)
3. 1/4”-20 Screws (4)
4. M5 Screws (4)
Tools required for installation:
• 3mm Hex Drive
(For attaching Mounting Bracket to
Docking Station with M5 Screws)
• 5/32” Hex Drive
(For attaching Mounting Bracket to
Motion Device with 1/4”-20 Screws)
Cable Management (continued)
5) Create a service loop with cables to ensure that no tension is on the
connectors and to enable intended motion.
6) Tie off cables onto a stationary part of the mounting system.
(Mounting system not included with Docking Station)
Collect cables to secure
to the mounting system
(Note: mounting system not included)
This loop must be large enough
to allow full range of expected
rotation and extension without
stressing connections.
Port Replication Capability
Parallel (DB-25)
Mouse
Keyboard
Antennas*
(Wi-Fi, GPS, Cellular)
Ethernet
USB 2.0 (x2)
VGA
Power Input
Display (x2)
(HDMI Dongle Required)
Serial
eSATA
Rearward Connectivity *(Antennas for DS-DELL-101-3 only) Side Connectivity
Microphone
Headphone
USB 2.0 (x3)