Hawking Technology Hawking Wireless-G HWUG1A User Manual
Page 10
7
How to Change Your IP Address to Static mode
-
If your wireless network uses a static IP address or requires manual configuration you may do
so by highlighting the USB wireless adapter(Shown above).
-
Select “Configure” to enter the configuration menu for the wireless adapter.
-
Select the Tab that is named TCP/IP
-
Select the menu button for “Configure IPv4” and choose the appropriate selection
-
You manually configure your IP Address, DNS Servers and other information here.
-
Please contact a network administrator if you are uncertain of the settings that are required to
connect to your network.
-
When you have finished select APPLY NOW to continue.