Husqvarna 372XP EPA II - Manual (Page 2)

2 – English
KEY T O SYMBOLS
Symbols on the mac hine:
W ARNING! Chain saws can be
dangerous! Careless or improper use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Alw ays wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator ′ s hands must be used
to operate the chain saw.
Never operate a chain saw holding it with
one hand only.
Contact of the guide bar tip with an y object
must be avoided.
Tip contact may cause the guide bar to
move suddenly upward and backward (so-
called kickback), which may cause serious
injury.
Recommended cutting
equipment in this example:
- Bar length 16 inches
- Max. nose radius 9 Teeth
- Chain type Oregon 91VG
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Symbols in the operator’ s manual:
Switch off the engine b y moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Alw ays wear approved protective gloves.
Regular cleaning is required.
Visual chec k.
Protectiv e goggles or a visor must be worn.
Filing with oil and adjusting oil fl ow.
The chain br ake must be engaged when the
chain saw is started.
W ARNING! Kickback may occur when the
nose or tip of the guide bar touches an object,
and cause a lightning fast reverse reaction,
kicking the guide bar up and towards the
operator. May cause serious personal injury.