beautypg.com

Electrical conections, Operating your water dispenser – haier WDNS116BBS User Manual

Page 7

background image

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit,

grounding reduces the risk of electric shock by providing an escape wire for the

electric current. This appliance is equipped with a cord containing a grounding

wire and a grounded plug. The plug must be inserted into an outlet that is prop-

erly installed and grounded.

• Improper use of the plug may result in the risk of electric shock.

• Consult a qualified electrician or service technician if the grounding

instructions are not completely understood or if in doubt as to whether

the appliance has been properly grounded.

WIRING REqUIREMENTS

This appliance must be plugged into a 15Amp, 115 Volt, 60Hz

GROUNDED OUTLET.
Note: Where a standard two-prong outlet is encountered, it is the personal

responsibility and obligation of the consumer to have it replaced with a

properly grounded three-prong outlet.

ExTENSION CORDS

We do not recommend the use of an extension cord with

this unit.

POWER INTERRUPTIONS

Occasionally, there may be power interruptions due to thunderstorms or

other causes. Remove the power cord from wall outlet when a power out-

age occurs. When power has been restored, re-plug the power cord into

wall outlet.

ELECTRICAL CONECTIONS

English

6

This water dispenser maintains instant hot and cold water for your cooking and

drinking needs. It accepts 3 or 5-gallon water bottles.

Cold / Hot Water Release Levers

Press the button to release the water flow.
Note: The hot water faucet is equipped with a child safety lock to prevent

accidental spilling of hot water. To release the hot water flow, push the

child safety lock button down and as you push in the hot water button.

Caution: Be careful when carrying hot water in your cup or container to avoid

any injury or harm from spills.

OPERATING YOUR WATER DISPENSER