beautypg.com

Proper care and cleaning precautions – haier WDNS116BBS User Manual

Page 10

background image

9

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

• Do not use mechanical devices or other means to accelerate the defrosting

process, other than those recommended by the manufacturer.

• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of

appliance, unless they are of the type recommended by the manufacturer.

• To avoid a hazard due to instability of the appliance, it must be fixed in

accordance with the instructions.

Caution: Before using any cleaning product, always read and follow the

manufacturer’s instructions and warnings to avoid personal injury and/

or product damage.

Note: It is best to clean the dispenser and its surrounding area when replacing

the empty bottle with a new one. This way you can move the unit easily

without the weight of the bottle.

GENERAL

• Before cleaning, place a dust cover on top of the water guard to prevent dust

and debris from going into the dispenser while cleaning.

• Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with

warm water. Use a sponge or a soft cloth dampened with the cleaning solution

to wipe down the unit.

English

PROPER CARE AND CLEANING

PRECAUTIONS

3. Use the HOT/+ or COLD/- buttons to adjust the heating temperature.
4. When setting the heating temperature, additional bars will be added as you

increase the heating from 190°F (Min) to 203°F (Max).

5. Press the Set button 1 time, the Cooling Level will be flashing
6. Use the HOT/+ or COLD/- buttons to adjust the cooling temperature.
7. When setting the cooling temperature, additional bars will be added as you

increase the cooling from 50°F (Min) to 43°F (Max).

8. If nothing is pressed for 8 seconds the display will automatically exit the Set

Function