Henny Penny CF-941 - Manual (Page 12)

Model CF-941
Figure 3-1
3-3. START-UP
Before using the cabinet, it should be thoroughly
cleaned as described in the cleaning procedures
section of this manual. To put the cabinet into
operation, move each POWER switch to the ON
position and adjust each control to the appropriate
temperature. The power light should illuminate
indicating that the unit is operating. The operating
temperature of this unit should be achieved in
approximately 30 minutes.
3-4. OPERATING WITH 1. Place the hot product inside the drawer.
PRODUCT
2. Serve the product first that has been in the cabinet
the longest.
3. Open the drawers only as necessary to load and serve
the product.
3-2 103