Harman-Kardon 347 - Manual (Page 16)

16 ZONE II REMOTE CONTROL FUNCTIONS
Zone II.2 Remote Control Functions
I Digital Media Player (DMP)
Selector: When Harman Kardon’s
(optional) is connected to
Digital
Media Player (DMP) Connector 8 and a
compatible Apple ® iPod ® is docked in ,
pressing this selector will select the iPod as the
audio source input device for the AVR 347. In
addition, if a video display is connected to one
of the Video Monitor Outputs
B, the iPod’s
messages will appear on screen, and in the
Upper and Lower Display Lines
Ò. The
⁄ / ¤ / ‹ / › Buttons DEa, the Set
Button F and the Transport Controls P
may be used to navigate the iPod and to operate
many functions. See page 45, and the manuals
for The Bridge and your iPod for more informa-
tion.
J Tuning Up/Down: When the tuner is in
use, these buttons will tune up or down through
the selected frequency band. If the Tuner Mode
button
I has been pressed or the Band but-
ton ! on the front panel was held pressed so
that A U T O appears in the Main
Information Display Ò, pressing either of
the buttons will cause the tuner to seek the next
station with acceptable signal strength for
quality reception. When the
MANUAL appears
in the Main Information Display Ò,
pressing these buttons will tune stations in
single-step increments. (See page 51 for more
information.)
K Preset Up/Down: When the tuner is in
use, press these buttons to scroll through the
stations programmed into the AVR’s memory.
When CD or DVD is selected using the Input
Selector button
4, these buttons may
function as Slow Fwd/Rev (DVD) or ”+10” (CD,
CDR).