Hayter Mowers Harrier 41 410D - Manual (Page 21)

Clean the engine cooling system. Clean more often under dusty
conditions or when airborne debris is present or after prolonged
operation whilst cutting tall, dry grass.
Replace the spark plug.
1. Air Filter
2. Fuel Cap
3. Start Grip
4. Oil Cap/ Dipstick
5. Exhaust Guard
6. Spark Plug / Lead
Loosen casing clamp screw (1) and move throttle control to choke
position and then push governor lever (2) as far as possible towards
the screw (1), whilst ensuring throttle lever does not move. Tighten
casing clamp screw.
Should only be made by an authorised Briggs & Stratton dealer.
Under no circumstances should the engine be adjusted to run at a
speed in excess of that shown on the Declaration of Conformity.
1.21
MOWER
1
2
3
BRIGGS & STRA TTON
HAR RIER 41
6 5
4
2
1
Engine
Throttle Cable Adjustment
Carburettor Adjustments
MAINTENANCE
100Hrs or Every Season