beautypg.com

How to use, Cleaner description, On-off switch – Hoover C1415 User Manual

Page 4

background image

4

Pull switch lock (P) above ON-OFF

switch (Q) straight out.

Dispose of lock.

Note: If lock has come off during

assembly, make sure switch is in the

OFF position (down) before plugging

cord in to electrical outlet.

Cleaner description

2. How to use

The assembled cleaner will look like the

drawing.
1. Handle

2. ON/OFF switch

3. Cord hooks: wrap cord around hooks

for storage.

4. Bag cap

5. Cloth bag

6. Dirt cup

7. Handle release lever: step on lever

to lower handle to operating or low

position.

8. Cleaner body

9. Furniture guard: helps prevent clean-

er from marking furniture.

10. Hood

11. Extra belt storage: open door to store

extra belt.

12. Carpet height control: slide knob to

correct setting for height of carpet

being cleaned.

Operate cleaner only at voltage specified

on data plate on bottom of cleaner.
WARNING: electrical shock could occur if

used outdoors or on wet surfaces.
To reduce the risk of electric shock, this

appliance has a polarized plug (one blade

is wider than the other). This plug will fit in

a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a quali-

fied electrician to install the proper outlet.

Do not change the plug in any way.

ON-OFF switch

To turn cleaner ON, push switch up.

To turn cleaner OFF, push switch down.

1-14

Pull support toward bottom of han-

dle slightly to make sure support is

locked in place.
Make sure hole in handle (N) is vis-

ible through hole in support.

With cloth bag to the front, place

assembled handle onto handle base

of cleaner body.
Rock handle side to side while push-

ing down firmly. Extra pushing effort

may be required.

Push bolt into hole on lower front of

handle.
If bolt will not go through hole

easily, handle is not pushed com-

pletely down.

1-15

1-16

1-17

1-18

1-19

Place nut (O) in recessed area at

back of handle. Hold nut in place

while tightening bolt securely with a

screw driver.
Note: Only one nut is needed on this

model. The extra nut is not required

but has been provided for your

convenience.

Reposition dirt cup into support at

bottom of cloth bag and snap latch-

es into position.

2-1

1

2

3

4

5

6

8

7

9

10

11

O

N

Q

P

12