Unloading images to a computer using the dock – HP PhotoSmart 620 User Manual

Page 69

Appendix B: Camera dock

Unloading images to a

computer using the dock

NOTE

If you are using a Macintosh computer, switch the

camera to

Disk Drive

in the

USB Configuration

found in the

Setup

menu.

Check that the HP Camera Dock is connected to your
computer.

Place the camera in the HP Camera Dock. It will turn on
automatically, and a dock intro screen will appear.

Press the

button on the dock to start the unload

process. The HP Image Unload software will launch on your
computer, and the images in the camera will automatically
unload to the computer. If there were any images on the
camera that had been selected in the

menu for

printing or e-mail, those actions are started after the images
have been unloaded to the computer.

The camera will return to the dock intro screen when your
images have been saved and shared. You can now take the
camera out of the dock, or leave it there to recharge the
camera batteries.