HP PhotoSmart 620 - Manual (Page 43)

5-Unloading, printing, and displaying images 41
1 Your camera came with a special
USB cable for connecting the
camera directly to a printer.
2 Connect the square end of the USB
cable to the printer.
3 Open the memory card door on
the side of the camera and
connect the small end of the USB
cable to the USB connector on the
camera.
4 Adjust the settings in the Print Print Print Print
Setup Setup Setup Setup menu on the camera to
complete the printing process.
Displaying images on a TV
Images in your camera can easily be displayed as a slideshow
on almost any TV. You must use the optional HP Camera Dock
to do this task. See
Appendix B: Appendix B: Appendix B: Appendix B: Camera dock Camera dock Camera dock Camera dock on page 65.
Displaying a slideshow
Once the camera is connected to the TV with the optional HP
Camera Dock, you are ready to start.
1 Turn on the camera. The button on the Camera Dock
should light up. Press the button to display the Slideshow Slideshow Slideshow Slideshow
menu. The menu choices are described in the following
table.