Heath Zenith LED Lighted Pushbutton with Courtesy Light 598-1226-01 - Manual (Page 4)

598-16-01
Figure 3 - Determining Correct Jumper
Position (Back of Pushbutton)
UP
JUMPER POSITION
SEE OWNER’S MANUAL
FOR DETAILS
MECHANICAL CHIME
ELECTRONIC CHIME
Jumper On Two Right Pins
for Electronic Chime
UP
JUMPER POSITION
SEE OWNER’S MANUAL
FOR DETAILS
MECHANICAL CHIME
ELECTRONIC CHIME
Jumper On Two Left Pins
for Mechanical Chime
5. If you have an electronic chime,
move the jumper on the back of your
pushbutton from the two left pins to
the two right pins (see Figure 3). Press
pushbutton to test again.
6. If your chime still does not operate
correctly, see Troubleshooting, page 5.
7. Once your pushbutton and chime
are wired and functioning correctly,
mount the pushbutton to the wall
using the screws provided.
Note: The
pushbutton must be mounted with the
lens facing downward.