Installation – Heath Zenith LED Lighted Pushbutton with Courtesy Light 598-1226-01 User Manual

Page 2

background image

598-16-01

1. Attach the two wires from your chime

and transformer to the screw terminals
on the back of your pushbutton (see
Figure 1). Press pushbutton to test
function.

2. If your chime functions correctly and

plays the entire tune, skip to step 7. If
your chime does not function correctly,
proceed with step 3.

Figure 1 - Attach Chime Wires to

Pushbutton (Back of Pushbutton Shown)

UP

JUMPER POSITION

SEE OWNER’S MANUAL

FOR DETAILS

MECHANICAL CHIME

ELECTRONIC CHIME

Wires from Chime and
Transformer

Screw
Terminals

Orientation
Marking

Mounting Holes

Installation

IMPORTANT: DO NOT install additional
diode(s) to pushbutton. Additional diode(s)
will cause chime to malfunction.

See also other documents in the category Heath Zenith Furniture: