Horizon Fitness EX-76 - Manual (Page 16)

BEFORE
YOU
BEGIN
16
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP
PRE-ATTACHED SCREWS
CONSOLE
CONSOLE MAST
CONSOLE WIRES
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Attach the CONSOLE MAST wires to the CONSOLE wires.
B) Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.
DO NOT PINCH WIRES!
C) Attach CONSOLE to the CONSOLE MAST using the 4 PRE-ATTACHED SCREWS.
Connect POWER CORD to the POWER CORD SOCKET, located at front of the main frame. Connect
POWER CORD to a power outlet. Flip the switch to the ON position. After a “beep”, the CONSOLE will
turn on.
YOU’RE FINISHED!