Horizon Fitness EX-76 - Manual (Page 10)

BEFORE
YOU
BEGIN
10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP
A) Open HARDWARE BAG FOR STEP 3.
B) Remove PRE-ATTACHED BOLT & WASHERS from PIVOT TUBE.
C) Slide PEDAL ARM onto PIVOT TUBE and attach by re-inserting PRE-ATTACHED BOLT and WASHERS.
D) Repeat on the other side.
E) Attach the PEDAL ARM COVER to the right PEDAL ARM using 1 SCREW (F).
F) Repeat on the other side.
PIVOT TUBE
PRE-ATTACHED BOLT AND WASHERS
SCREW (F)
PEDAL ARM COVER
PEDAL ARM
SCREW (F)
8 mm
Qty: 2
HARDWARE BAG FOR STEP CONTENTS :