Horizon Fitness EX-76 - Manual (Page 14)

BEFORE
YOU
BEGIN
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 7
SPACER RINGS (N)
LOWER HANDLEBAR
NUT (Q) BOLT (M)
LOWER LINK ARM
SPACER (O)
LOWER LINK ARM
SPACER (O)
SPACER RINGS (N)
LOWER
HANDLEBAR
WASHER (P)
A) Open HARDWARE BAG FOR STEP 7.
B) Slide SPACER (O) into LOWER LINK ARM.
C) Place 2 SPACER RINGS (N) on both sides of SPACER (O). While holding
SPACER RINGS (N), slide LOWER LINK ARM into bottom end of LOWER HANDLEBAR.
D) Insert 1 BOLT (M) into LOWER HANDLEBAR and secure using 1 WASHER (P) and 1 NUT (Q).
E) Repeat on other side.
BOLT (M)
45 mm
Qty: 2
SPACER (O)
Qty: 2
SPACER RING (N)
Qty: 4
WASHER (P)
18 mm
Qty: 2 NUT (Q)
8 mm
Qty: 2
HARDWARE BAG FOR STEP 7 CONTENTS :