Electrolux 30" FREE-STANDING GAS WAVE-TOUCHTM RANGE 316471110 - Manual (Page 46)

46
Setting Your Preferences
Example
Adjusting oven temperature
User programmable offset (UPO)
Your appliance has been factory calibrated and
tested to ensure an accurate baking temperature.
For the first few uses, follow your recipe times and
temperature recommendations carefully.
If you feel your oven is too hot or too cool from
your baking experience, the oven temperature may
be adjusted to your liking. The temperature may be
increased up to +35°F (+19°C) or decreased down
to -35°F (-19°C) from normal.
See the example below to decrease the
temperature in the
upper oven.
1. Press and continue to press
USER PREF until you reach
the preset
UPO mode
-Fig. 1.
2. Press -lo to adjust the
temperature lower.
3. Use -lo to advance to -10
-Fig. 2.
Example
Step Press
To set the temperature
higher use the
hi+ key.
Fig. 1
4. Press START/enter to accept or
press CANCEL/off to reject.
Example
1. Press and continue to press
USER PREF until you reach
the preset
UPO mode.
-Fig. 1 -
Adjusting lower oven
temperature (UPO)
The temperature may be increased +35°F (+19°C)
or decreased -35°F (-19°C) from normal.
See the example below to increase the
temperature in the
lower oven.
2. Press +hi to adjust the
temperature higher. -Fig. 2-
3. Use +hi to advance to 10.
-Fig. 2-
To set the temperature lower
use the lo- key.
Example
Step Press
Fig. 1
Fig. 2
4. Press START/enter to accept
or press CANCEL/off to
reject.
Fig. 2