Electrolux 30" FREE-STANDING GAS WAVE-TOUCHTM RANGE 316471110 - Manual (Page 15)

15
Surface Cooking
Cookware
Using proper cookware
The size and type of cookware used will influence
the setting needed for best cooking results.
Cookware should have flat bottoms that make good
contact with the entire burner grate surface. Check
for flatness by rotating a ruler across the bottom of
the cookware.
Cookware material types
The cookware material determines how evenly and
quickly heat is transferred from the surface burner
to the pan bottom. The most popular materials
available are:
•
Aluminum - Excellent heat conductor. Some
types of food will cause it to darken (Anodized
aluminum cookware resists staining & pitting).
• Copper - Excellent heat conductor but discolors
easily.
• Stainless steel - Slow heat conductor with
uneven cooking results. Is durable, easy to clean
and resists staining.
• Cast iron - A poor heat conductor however will
retain heat very well. Cooks evenly once cooking
temperature is reached.
• Porcelain-enamel on metal - Heating
characteristics will vary depending on base
material.
• Glass- Slow heat conductor.
Cookware should always:
• Have a flat bottom.
• Have tight fitting lids.
• Be well balanced.
• Be made of a material that conducts heat well.
• Be easy to clean.
Oven vent location
The oven vent is located below the backguard.
When the oven is on, warm air is released through
this vent. This venting is necessary for proper air
circulation and provides good baking results in the
oven. DO NOT BLOCK THIS VENT.
Oven vent location
Fig. 1