Echo GT-225i - Manual (Page 3)

G
rass
T
rimmer
O
peraTOr
'
s
m
anual
3
InternatIonal symbols
BeWARe
- ThRoWN,
RIcocheT
oBjecTs
WeAR hANd ANd
fooT pRoTecTIoN
hoT
suRfAce
symBol
descRIpTIoN/ApplIcATIoN
symBol foRm/
shApe
symBol
descRIpTIoN/ApplIcATIoN
symBol foRm/
shApe
ReAd ANd uNdeR-
sTANd opeRAToR's
mANuAl.
WeAR eyes, eARs
ANd heAd pRoTec-
TIoN
fuel ANd oIl
mIXTuRe
sAfeTy/AleRT
do NoT smoke
NeAR fuel.
WeAR slIp Re-
sIsTANT fooT
WeAR.
do NoT eXceed
10,000 Rpm.
symBol
descRIpTIoN/ApplIcATIoN
symBol foRm/
shApe
symBol
descRIpTIoN/ApplIcATIoN
symBol foRm/
shApe
cARBuReToR Ad-
jusTmeNT
- Idle speed
cARBuReToR Ad-
jusTmeNT
- hIGh speed
mIXTuRe
emeRGeNcy sTop
cARBuReToR Ad-
jusTmeNT
- loW speed mIX-
TuRe
do NoT AlloW
flAmes oR
spARks NeAR
fuel.
IGNITIoN
oN/off
pRImeR
BulB
keep BysTANdeRs ANd helpeRs
AWAy 15 m (50 fT.).
choke coNTRol
"cold sTART"
posITIoN
(choke closed)
choke coNTRol
"RuN"
posITIoN
(choke opeN)
do NoT use
BlAdes. sTRING
lINe oNly
BeWARe
- ThRoWN,
RIcocheT
oBjecTs
cAuTIoN
The safety alert symbol accompanied by the word
“CAUTION” calls attention to an act or condition
which may lead to minor or moderate personal
injury if not avoided.
s
afety
manual safety symbols and Important InformatIon
WARNING
The safety alert symbol accompanied by the word
“WARNING” calls attention to an act or condi-
tion which CAN lead to serious personal injury or
death if not avoided.
CIRCLE AND sLAsh syMbOL
This symbol means the specific action
shown is prohibited. Ignoring these prohi-
bitions can result in serious or fatal injury.
NOTE
This enclosed message provides tips for use, care and
maintenance of the unit.
IMPORTANT
The enclosed message provides information neces-
sary for the protection of the unit.
dANGeR
The safety alert symbol accompanied by the word
“DANGER” calls attention to an act or condition
which WILL lead to serious personal injury or
death if not avoided.
Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre-
ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean
to you.
RoTATING
cuTTING ATTAch-
meNT