Ericsson GF768 - Manual (Page 29)

Receiving Area Information
This chapter describes how you can make your phone available for Area Information (AI).This
service is network dependent.
About Area
Information
While the SMS function is a personal service
with messages directed to you, the Area
Information is a broadcast type message that is
sent to all subscribers in a certain cell, for
example a section of a city, at the same time.
You can set your phone to receive only those
types of messages you want to listen to, e.g.: the
local weather forecast or the local traffic report.
Each message is identified by a 3-digit code.
Check with your service provider for which
message types are available in your network.
When you receive an AI the display looks like
this:
The default setting for the phone is that the AI
service is turned off.
At present the following message types exists:
Code Title
000 Index
010 Flashes
020 Hospitals
022 Doctors
024 Pharmacy
030 Long-distance road reports
032 Local road reports
034 Taxis
040 Weather
050 District
052 Network information
054 Operator services
056 Directory enquiries (national)
057 Directory enquiries (international)
058 Customer care (national)
059 Customer care (international)
Activating the
Area Information
● Select On in the AreaInfo sub-menu.
Adding a Code
1. Select EditList in the AreaInfo sub-menu.
2. Press the right arrow key to find the first
empty position and press YES .
3. Enter a new code and press YES .
The display could now look like this if you
have added the pharmacy title to the second
position:
2 024
Erasing a Code
1. Select Edit List in the AreaInfo sub-menu.
2. Scroll to the position (to the left in the dis-
play) you wish to erase and press YES .
3. Press YES at the erase prompt.
Changing a Code
1. Select Edit List in the AreaInfo sub-menu.
2. Scroll to the position (to the left in the dis-
play) you wish to change and press YES .
3. Scroll to New Code and press YES .
4. Enter the new code and press YES .
EN
LZT 126 1343/2 R1A 23