Ericsson GF768 - Manual (Page 17)

Creating Your Own Phone Book
This chapter describes how you can store phone numbers both on your SIM Card and in your
phone’s own memory.
About the
Phone Book
You can store your phone numbers both on
your SIM Card and in your phone’s own
memory. The difference between the two is you
can remove the SIM Card and use all those
telephone numbers in other phones, while
phone’s memory always stays the same no
matter which SIM Card is inserted.
You can store up to 50 phone numbers in the
phone memory. The number of phone numbers
you can store on your SIM Card is SIM Card
dependent.
International Numbers
If you intend to use your phone book both at
home and abroad, you should store all phone
numbers as international phone numbers, i.e.
with the international prefix “+” and the country
code before the area code (without any leading
zero) and the number.
● To enter the plus prefix, press and hold the
zero until you see the plus in the display.
Speed Dialling
The phone numbers that you store in positions
1–9 on the SIM Card can be called by entering
the position number and then pressing YES . You
should, therefore, save positions 1–9 for
important numbers.
Storing Numbers
on SIM Card
1. Enter the phone number you
wish to store.
2. Press the left arrow key until Store is shown
and press YES twice.
3. Enter the first letter of the name by pressing
the appropriate numeric key as many times as
required (see Table 2 for all characters).
Enter the next letter when the cursor has
moved to the next letter position. The number
of letters the name can have is SIM Card de-
pendent.
Press
YES when you are done with the name.
4. If you want to store the phone number in the
storage position suggested in the display, go
directly to step 5.
If you want to store the number in a different
position, press
CLR to erase the position num-
ber displayed and enter another number.
5. Press YES to confirm the position number.
The display shows Stored.
If you have chosen a position number that is
already occupied, Overwrite? is displayed.
Press
YES to overwrite or NO to return to the
position number and change it.
Storing Numbers
in Phone’s
Memory
Follow the the same procedure as storing a
phone number on the SIM Card up to step 4.
When you are prompted to set storage position
number, press
# once to enter the ¤ character
(which indicates storage in phone memory) and
twice to have the phone suggesting the first free
storage position.
Press
YES to confirm the storage.
EN
LZT 126 1343/2 R1A 11