Eiki NPC-1 - Manual (Page 8)

- 6 -
Technical Specifications
Hardware
Processor
16 bit processor, 80186
Memory 512 KB
Serial Connector Male DB9, DTE
Interface
LAN
Auto-detecting 100Base-T (10/100 Mbps)
Serial RS-232
Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Performance
Speed
50 bps – 230 Kbps
OS supported
NPC-1
Windows XP, Windows 2000,
Windows NT (SP5), Windows 98SE and Windows ME
Protocol TCP, IP, UDP, DHCP, ICMP
Operation Mode TCP Server
Management QuickLogix™NetControl Starter Package
QuickLogix™NetControl Advanced Package (optional)
Power and Environment
Power requirements
NPC-1: DC 9V to 30V, 300 mA (max.) at 9V
Operating temp. 0 – 55°C, 32 – 131°F
Operating Humidity 5 – 95%RH
Storage Temp. -20 – 85°C, -4 – 185°F
Dimensions 90 x 100.4 x 22 mm (W x D x H, including ears)
67 x 100.4 x 22 mm (W x D x H)
3.54 x 3.95 x 0.87 inch (W x D x H, including ears)
2.64 x 3.95 x 0.87 inch (W x D x H)
Surge protection 15KV ESD protection for serial port
Magnetic isolation 1.5KV for Ethernet
Regulatory approvals FCC, CE, UL, CUL
manual.pmd 3/18/2003, 6:32 PM 6