Electrolux 95752 G - Manual (Page 7)

7
Before any maintenance or cleaning can be carried out, you must DISCONNECT the
hob from the electricity supply.
The hob is best cleaned whilst it is still warm, as spillage can be removed more easily
than if it is left to cool.
The Hob Top
Regularly wipe over the hob top using a soft cloth well wrung out in warm water to
which a little washing up liquid has been added. Avoid the use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily soiled, it is recommended that a cleaning product
such as Hob Brite or Bar Keepers Friend is used.
If scratches or cracks are noticed, disconnect the appliance from the electrical
supply and call your nearest Service Force Centre.
Pan Supports
The pan supports are dishwasher proof. If washing them
by hand, take care when drying them as the enamelling
process occasionally leaves rough edges. If necessary,
remove stubborn stains using a paste cleaner.
The Burners
The burner caps and crowns can be removed for
cleaning. The cap and crown of each burner are
secured with two screws. To separate the two pieces, lift
the cap, turn it upside down, then undo the two fixing
screws as shown in fig. 2. After cleaning, reassemble
the two parts and refit the cap on its correct position on the burner. Wash the burner caps
and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well
moistened soap impregnated steel wool pad can be used with caution, if the marks are
particularly difficult to remove. After cleaning, be sure to wipe dry with a soft cloth.
Ignition electrode
The electric ignition is obtained through a ceramic "electrode" and a metal electrode
(fig. 1 - letter B). Keep these components well clean, to avoid difficult lighting, and
check that the burner crown holes are not obstructed.
Maintenance and Cleaning
FO2265
Fig. 2