Epson 188 - Manual (Page 50)

50 • Operating Your Printer
Using the Pull Tractor Unit
(if installed)
Paper can be loaded from the rear of the printer or, if you have a
slotted printer stand, it can be loaded from the bottom.
1. Remove the acoustic cover (
1 ) and access cover ( 2 ).
2. Adjust the left tractor if necessary, making sure that it is not
more than ½-inch (12.7 mm) from the left end of the tractor unit.
To move the tractor, pull the lock lever (
1 ) forward, slide the
tractor to the desired position, then push the lever back to lock it
in place.