Epson 188 - Manual (Page 38)

38 • Setting Up Your Printer
Changing the Emulation Default in the
Printer Menu
The default for the emulation in the printer menu is IBM. If you wish
to change the menu default to another emulation:
1. Make sure continuous forms paper is loaded.
2. Turn the printer off.
3. Press and hold
SELECT
while turning the printer back on.
The printer enters the menu mode.
4. Press
FORM FEED
.
The first line of the menu prints, showing the emulation
engaged. For example:
Printer Control Emulation Mode IBM
5. Press
TOF SET
once or twice until the emulation you wish to
engage appears in the right-hand column.
Each time you press TOF SET, a new line prints and the setting
which appears in the last column changes. For example:
Printer Control Emulation Mode Epson
Printer Control Emulation Mode ML
6. Press
PITCH
and
MODE
together to save your setting and exit
the printer menu.