Epson 188 - Manual (Page 45)

45 • Operating Your Printer
For Example
The default setting for the zero character is slashed. To change the
setting to unslashed:
1. Press and hold
SELECT
while turning the printer on.
The following line prints:
Printer Control Emulation Mode IBM
2. Press
LINE FEED
several times until the Symbol Sets group line
appears:
Symbol Sets Character Set SetI
3. Press
FORM FEED
repetitively until the Zero Character item line
appears:
Symbol Sets Zero Character Slashed
4. Press
TOF SET
once.
The following line prints:
Symbol Sets Zero Character Unslashed
5. Press
PITCH
and
MODE
together to save the setting and exit the
Menu Mode.