Ericsson LBI-38823D - Manual (Page 36)

SCAN OPERATION
Enable/Disable SCAN
To enable Group scanning, press and release the SCAN key. The
"SCN" icon will illuminate to indicate scan is active. When scan is on, press
and release the SCAN key to disable scan operation. The "SCN" icon will
be extinguished when scan is turned off.
Add/Delete Groups
Groups can be added or deleted from the scan list as necessary. To
add Groups to the scan list:
1. Select the desired Group to be added. If the current group is already
included in the scan list, the "S" icon will be illuminated.
2. To add the group to the scan list, press the SHIFT/CLR key and then
press the SCAN key. The "S" icon will illuminate and the group will be
included.
To delete Groups from the scan list:
1. Select the desired Group to be deleted. If the current group is already
included in the scan list, the "S" icon will be illuminated.
2. To delete the group from the scan list, press the SHIFT/CLR button
and then press the SCAN key. The "S" icon will turn off and the group
will be removed from the scan list.
Wide Area And Priority System Scanning (Optional)
Dual Format PCS

radios operating within an EDACS system may
be programmed for Wide Area Scan operation for multi-site applications.
Upon the loss of the currently selected system’s control channel, radios may
be programmed to automatically scan other systems. If a new control
Scan must be disabled to add a Group to the scan list.
NOTE
36