Ericsson LBI-38823D - Manual (Page 12)

System And Group/Channel Indicators
The SYStem display indicates the number of the
current EDACS, GE-MARC or Conventional sys-
tem selected.
The GRP (Group) display indicates the number of
the current Group in an EDACS or GE-MARC Sys-
tem. The GRP icon is surpressed while operating
from a Conventional System, but the field is still
used to display the Channel selected.
Status Indicators
TX The Transmitter flag is on when the radio is trans-
mitting.
BSY The Channel Busy flag is on when the radio re-
ceives a call or when a conventional channel is in
use. The flag is also on when transmitting on a
trunked channel. This flag flashes when a call is
queued on a trunked system.
BT The Battery flag is on when the battery power is
low and needs charging.
NO EDACS - The NO Service flag is used in conjunction
with the Service flag to indicate no service. The
illumination of both the NO and the SV flag indicates
a no service condition.
GE-MARC - The NO flag is used in conjunction with
the Service flag to indicate an unsuccessful attempt
to access a GE-MARC System. The illumination of
both the NO and the SV flag indicates a failed
attempt to access a GE-MARC system.
CONVENTIONAL - The NO flag remains off at all
times while operating in Conventional mode.
12