Ericsson LBI-38823D - Manual (Page 13)

SV EDACS - The Service flag is normally on to indicate
service. If a no service condition occurs the SV flag
and the No Service flag will be illuminated.
GE-MARC - The Service flag is normally off. If an
unsuccessful attempt is made to access a GE-
MARC System, both the SV and the NO flags will
turn on.
CONVENTIONAL - The Service flag remains off at
all times while operating in Conventional mode.
SCN The Scan flag is on when Scan is activated.
S The "S" flag is used to indicate two conditions. The
"S" flag is used in conjunction with the "PC" flag to
indicate the radio is in the Special Call mode. The
"S" flag is also used to indicate when a trunked
group is scan enabled.
PC The "PC" flag is illuminated with the "S" flag to
indicate the radio is in the Special Call mode. When
the "PC" flag is illuminated without the "S" flag, the
radio is in the Program mode.
1 The "1" flag is used only for radio logical ID display.
When receiving a call, the most significant digit (0
or 1) of the originating radio’s ID will be displayed
by the "1" flag. When on, the ID of the originating
radio begins with a 1.
13