Electrolux EWT704 - Manual (Page 9)

CONTROL PANEL
Model: EWT 704
Model: EWT 904
Model: EWT 113
2 3 4 5 6 7
2 3 4 5 6 7
1. Program Selector Dial
2. Wash Load Button
3. Soak Time Button
4. Rinse Option Button
5. Delay End Button
6. Start/Hold To Pause Button
7. Display
Model: EWT704, EWT904
See page 17.
Model: EWT113 See page 18.
1
1
2 3 4 5 6 7 1
NOTE: If you do not press a button
within 5 seconds the washing
machine will return to the previous
setting. To reprogram, simply repeat
the above process.
Press the “Rinse Option” button to
change the selection, then press the
Start/Hold To Pause button to store
the new selection. 2.
Turn programe selector knob to any
program except ‘O’ position, before
pressing the Start/Hold To Pause
button (Standby Mode), press the
“Wash Load”and “Soak Time”
buttons simultaneously for about 2
seconds to enter Enabling/Disabling
End-Of-Wash Beeping mode.
The digital display will be “ ” when
the end of wash beeping is enabled
(this is the default factory setting).
1. The digital display will be “ ” when
the end of wash beeping is disabled.
9