Electrolux EWT704 - Manual (Page 14)

Select The Required Program
Program Option Buttons
When the machine is in PAUSE
mode, moving the Knob to a new
position will result in the machine
resetting to the start of the new
program. 1.
When the machine is running,
moving the Knob to a new position
will result in the machine continuing
the wash and it will show “ ” on
the display with 3 consecutive short
beeps to remind you that this option
is not allowed.
2.
Turn the program selector dial to the
required program. The Display shows
the duration of the selected program.
If you do move the Program Selector
Knob the effect will be different
depending on the status of the machine
at the time you do this, as follows:
Depending on the program, different
functions can be combined. These
must be selected after choosing the
desired program and before depressing
the “Start/Hold To Pause” button.
When these buttons are pressed, the
LED lights come on and you will get a
information shown in the digital display.
NOTE: When you choose the
WOOLLENS and BEDDING program,
the DEEP RINSE option is automatically
selected for you. You will not be able to
select and use Eco Rinse and Fast Rinse
with these two programs.
When you select the DRAIN+SPIN
program, there will be a delay of at least
2 minute before the washing machine
starts to spin.
This delay is a pump out (DRAIN) period
to ensure the bowl is empty of water,
which is necessary before spin
commences.
Even though you may have only put wet
clothes into an empty bowl, the delay
before spin will still occur to be safe and
to protect your washing machine.
The Program Selector knob is not a
timer. Once you select a wash program,
the Program Selector knob will stay at
that position for the whole wash cycle.
The selector dial is divided into following
sections.
Regular Wash and Fast Wash ;
Colours, Delicates, Heavy Soil,
Woollens, Handwash, Bedding,
Rinse+Spin, Drain+Spin and Tub
Cleaning.
14