Electrolux EOB 68713 - Manual (Page 39)

electrolux 39
Oven Shelf Support Rails
The shelf support rails on the left and right
hand sides of the oven can be removed
for cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from
the oven wall and then unhitch at the
back (1, 2).
Fitting the shelf support rails
To install, first reattach the rails at the
back, then put them into position at the
front and press them into place (3).
To clean the shelf support rails, soak in
warm soapy water and remove stubborn
marks with a well wetted soap
impregnated pad.
Rinse well and dry with a soft cloth.
When cleaning the shelf supports,
take care not to remove the
lubricating grease behind the
telescopic runners. This is meant to
ensure their good operation.
1
2
3