Eclipse - Fujitsu Ten AVN5495 EN - Manual (Page 8)

- 8 -
ACC ON/OFF power supply terminal (blue/white)
If you use this terminal to connect equipment such as an external amplifier, you can still hear the audio guidance
from the navigation system even when audio is turned off. Connect it to the control terminal for the external
amplifier or other equipment.
A popping noise may be heard when the engine is being started or the ignition switch is at the ON position, but
this is normal and is not the sign of a malfunction.
Vehicle speed pulse signal wire (Purple/White)
Connect to the vehicle speed pulse signal terminal.
Parking brake signal wire (Red/White)
Connect to the parking brake signal terminal.
Reverse signal Wire (Green)
Connect the reverse signal output of the vehicle to this terminal.
E-LAN terminal (13P)
Connect to the E-LAN terminal of the CD changer, etc.
VIDEO OUT terminal (Yellow)
Connect to an external monitor with video input.
Front line-out terminal
Connect to the RCA connector of an external amplifier.
Rear line-out terminal
Connect to the RCA connector of an external amplifier.
Line-out terminal (Non fader)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
Back-eye camera external input terminal (4P)
Used with the Eclipse back-eye camera (sold separately).
12
11
10
9
A
B
D
E
Main unit connections
C
F