Installation outside the vehicle (example) – Eclipse - Fujitsu Ten AVN5495 EN User Manual
Page 16
- 16 -
- Installation outside the vehicle (example) -
Choose an installation location where the GPS
antenna can be attached securely.
1
Remove the backing paper from the body
protective sheet and attach the sheet to the
vehicle.
2
Install the GPS antenna on top of the body
protective sheet.
3
Body protective
sheet (clear)
11
Route the GPS antenna cable to the main unit
while securing it with harness fixing tape.
7
Harness fixing tape
14
GPS antenna
8
Front of vehicle
Route the GPS antenna cable inside the vehicle's
trunk and secure it with clamps.
4
Attach the waterproof cushion so that the GPS
antenna cable is flat against the weatherstrip
when the trunk lid is closed.
5
Route the GPS antenna cable while securing it
with cable ties.
6
Cable tie
(long)
13
Waterproof cushion
Front of vehicle
Front of vehicle
Weatherstrip
Route to
main unit
Clamp
(metal)
12
9
Apply plain water or soapy water to the
waterproof cushion when moving it.
Tip
Cut the harness fixing tape into usable lengths
with scissors. Do the same for the rest of the
installation.
Tip